Yealink CPE80, Руководство администратора

Страница: 62 / 321

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
46
3.
Replace the battery cover.
Remote Control Battery Safety Information

Never make wrong polarity connection when charging and discharging battery packs.

Avoid crushing, puncturing, or putting a high degree of pressure on any battery, as this can
cause an internal short-circuit, resulting in overheating.

Remove the batteries if they are not in use for long period of time. Battery leakage and
corrosion can damage the remote control, dispose batteries safely.

Do not dispose used batteries in domestic waste. Dispose batteries at special collection
points or return to stores if applies.

Do not dispose batteries in a fire.
Powering the Endpoint On or Off
You have two options for power and network connections. Your system administrator will advise
you which one to use.

AC power (Optional)

Power over Ethernet (PoE)
AC Power (Optional)
To connect the AC power:
1.
Locate the DV12V port on the cable hub, and connect it to the electrical power outlet with
the supplied power adapter.