Yealink CP969, Руководство администратора

Страница: 216 / 868

Administrator’s Guide for SIP-T5 Series Smart Media Phones
194
7.
Click
Confirm
to accept the change.
To configure the NTP server and time zone via phone user interface:
1.
Tap
Settings
->
Basic
->
Time & Date
->
Type
.
2.
Tap the
Type
field.
3.
Tap
SNTP Settings
in the pop-up dialog box.
4.
Tap the
Time Zone
field.
5.
Tap the time zone that applies to your area in the pop-up dialog box.
6.
Enter the domain name or IP address of SNTP server in the
NTP Server1
and
NTP Server2
field respectively.
7.
Tap the
Daylight Saving
field.
8.
Tap the desired value in the pop-up dialog box.
9.
Tap the
Location
field.
This field appears only if
Daylight Saving
field is selected to
Automatic
.
10.
Tap the desired time zone name in the pop-up dialog box.
11.
Tap to accept the change.
Time and Date Settings
You can set the time and date manually when IP phones cannot obtain the time and date from
the NTP time server. The time and date display can use one of several different formats.
Procedure
Time and date can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure the time and date manually.
Parameter:
local_time.manual_time_enable
Configure the time and date formats.
Parameters:
local_time.time_format
local_time.date_format
Web User Interface
Configure the time and date manually.
Configure the time and date formats.
Navigate to
:
http://<phoneIPAddress>/servlet?m=m
od_data&p=settings-datetime&q=load
Phone User Interface
Configure the time and date manually.
Configure the time and date formats.