Yealink CP860 SERIES, Руководство администратора

Страница: 73 / 1126

Setting Up Your System
47
To configure DHCP via web user interface:
1.
Click on
Network
->
Basic
.
2.
In the
IPv4 Config
block, mark the
DHCP
radio box.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
To configure DHCP via phone user interface:
1.
Press
Menu
->
Advanced
(default password: admin) ->
Network
->
WAN Port
->
IPv4
.
1.
Press or , or the
Switch
soft key to select the
DHCP
from the
Type
field.
2.
Press the
Save
soft key to accept the change.
3.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
Static DNS
Static DNS address(es) can be configured and used even though DHCP is enabled.
Procedure
Static DNS can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.
cfg
Configure the static DNS feature
.
Parameter:
static.network.static_dns_enable
<MAC>.cfg
Configure static DNS address.
Parameters:
static.network.primary_dns
static.network.secondary_dns
Web User Interface
Configure the static DNS feature
.
Configure static DNS address.
Navigate to:
http://<phoneIPAddress>/servlet?p=netw