Yealink CP Series, Как настроить

Страница: 1 / 5

2/28/2019 Auto Provision your Yealink CP series IP Phone for 3CX v15
https://www.3cx.com/sip-phones/yealink-cp-series/ 1/5
How to configure CP Series for 3CX
This guide applies to v15.5 only.
On this topic
Supported Models: Yealink CP series
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the IP Phone
Step 3: Provision the phone
Local LAN: Provision via Plug’n’Play
Remote phones: Provision via RPS server
Step 4: Extended Phone Configuration
Known Limitations
Supported Models: Yealink CP series
● Yealink CP860
● Yealink CP920
● Yealink CP960
Step 1: Upgrade to the Required firmware
Ensure that the phone is running on the required firmware by 3CX. In case the device needs manual updating
download the latest distributed required firmware by 3CX
here . Read how to check what firmware the phones
are running on and how to upgrade them in this guide: How to manual upgrade Yealink IP phones .
Step 2: Factory Reset the IP Phone
Before provisioning the IP phone, the phone must be brought back to factory defaults in case the device has
residual settings of a previous configuration. To reset the device read our
How to Factory Reset Yealink
phones document.
Step 3: Provision the phone
There are several methods to provision a phone: