YBA DESIGN P1000, Руководство по обслуживанию

Страница: 5 / 11

5
Trimmer 1k (x1)
R YBA 110 (x7)
R YBA 500 (x1)
R YBA 1k2 (x5)
R YBA 1k8 (x1)
R YBA 2k2 (x2)
R YBA 3k3 (x3)
R YBA 4k7 (x2)
R YBA 10k (x4)
R YBA 47k (x2)
Transistor 2N5551 (x2)
Transistor 2N5401 (x2)
Transistor 2N5416 (x1)
Transistor 2N3440 (x1)
Transistor MJE15030 (x3)
Transistor MJE15031 (x2)
Transistor MJ15024 (x8)
Transistor MJ15025 (x8)
Capacitor 10µF 100V (x3)
Capacitor 0.1µF (x1)
Capacitor 0.33µF (x7)
Capacitor 100µF 100V (x5)
Capacitor 470µF 63V (x2)
Notes :
- Output transistors should be matched in gain before replacement. Good matching
makes bias and offset setting easier.
- When one or more output transistor is broken, it is recommended to change the
whole set of power devices.
- Components are soldered on top side of the PCB
- T9 (MJE15030) must be soldered once PCB is installed on its metal socket
- Power transistors must be soldered after PCB is installed on its metal socket