Wireless
Security Camera
User
Manual
YATWIN
Smart Home
Version 2.3
Welcome
Please read this manual carefully before using and keep it
properly for future reference.
Thank you for purchasing YATWIN Wireless Security Camera.
Here you will find useful information about the camera’s
installation, operation, features and functions as well as
information to aid in troubleshooting.
Important Security Warning
In order to keep your YATWIN camera secure and prevent
unauthorized access, please make sure to follow the steps
below:
•
Always make sure that your camera has the latest
firmware.
•
Always change the default password for your camera.
Always ensure that your password is at least 8-10 characters
long and contains a combination of lowercase characters,
uppercase characters as well as numbers.
1. Getting Started
1.1
Device Overview
The diagram below shows the camera’s profile and rear
panel.
The camera’s indicator light status
:
-
Light is solid green and steady
:
The camera is connected to the network and work normally.
-
Light is green and blinking quickly
:
The camera is connecting to the network or ready
-
The light goes out
:
The camera isn’t connected to the network.
1.2 APP Download
You need the “
EyeCloud
” app to set up your
camera.
To download the
EyeCloud
app for Android, scan QR code or search for
EyeCloud
on Google Play.
To download the
EyeCloud
app for iOS, scan
the QR code or search for
EyeCloud
on App
Store.
1.3 Register
Install the EyeCloud app and click “Register Now”. Create and
input user name and password to finish registration.
2. Camera Access Setup
This section of the guide will provide the user with
information on how to setup access to the camera through
any of the following methods:
1.2
Wi-Fi Connection
For purposes of this guide, we will use Android, although
both apps have the similar interface. (
The App Interface may
differ slightly from the screenshots below)
(1)
Enter the EyeCloud app, tap the
+
icon on the home
age, tap “
Scan QR Code
” to scan the QR code on the
bottom of the camera. After scanning successfully, tap
“
Wireless Installation
”.
Note: If you can not scan the QR code, please tap
“
Other
”, tap “
IP camera
”, tap “
Wireless Installation”
to
proceed WiFi configuration.
(2)
Please
power on the camera
and wait for about 30
seconds. The camera will rotate to perform a self-test