YATO YT-85132, Инструкция по эксплуатации

Страница: 10 / 40

10
Unplug the charger from the mains outlet.
Remove the battery from the charging station, by pressing the battery latch button. You should remove the battery from the charging station immediately after the end of the
charging process. Leaving the battery in the mains connected power charging station may result in its irreversible damage.
Due to the fast charging process the charging station has been equipped with a fan, which may turn on during the charging process of the battery pack. Despite the operation
of fan of charging station, the battery may become warm during charging. This is normal. When you are loading the battery in a high temperature environment the temperature
protection in charger can switch on. The charging process is interrupted until the cooling of electronic systems of station, after that it is automatically resumed. In such
conditions, the battery charging time will be longer.
TECHNICAL PARAMETERS
Parameter Unit of measurement Value
Catalogue number YT-85132 / YT-85133
Operating voltage [V] 40 DC / 36 DC
Mass [kg] 0,7 / 0,7
Battery Li-ion
Battery capacity [mAh] 2500
Power pack
Input voltage
[V] ~230
Mains frequency [Hz] 50
Nominal power [W] 160
Output voltage [V] 36 DC
Output current [mA] 3600
Charging duration [h] 1
GB
O P E R A T I N G I N S T R U C T I O N