5 Options
Replacement
Refer to the table below for an overview about the replacement of options, which might be installed at the
drive that has to be replaced. Replace an option only by the appropriate new type and never try to apply
any not mentioned option or J7 option to the J1000.
Type
Description
J7
J1000
Interface for Remote operator
SI-232/J7
SI-232/J
Interface for RS-232 PC
communication (Memobus)
SI-232/J7C
SI-232/JC
Serial
communications
Interface for RS-422/485
communication (Memobus)
SI-485/J7
SI-485/J
Remote operator without
potentiometer
JVOP-146
JVOP-182
Remote operator with
potentiometer
JVOP-144
not available
Extension cable 1 m
WV001
WV001
Operator panel
Extension cable 3m
WV003
WV003
Potentiometer
Option
To use a potentiometer on the
drive for setting up the frequency
reference.
Built in
AI-V3/J
DIN rail
mounting
Used to mount the drive on a DIN
rail.
EZZ08122x
Use the same.
When replacing a J7xA43P0
by a JA4A0009 a different
DIN rail mounting kit is
required!
AC reactors
UZBA-B
same as J7
DC reactors
UZDA-B
same as J7
VAN-V07007E
[J7
→
J1000] Replacement Instructions
8/16
