2.3.3 Memory management
The following memory systems are available for every Touch Panel:
n
256Mbyte work memory
n
128Mbyte Flash disk
n
USB storage media using "Host"-USB-A interface
n
Slot for SD
Every Touch Panel has a work memory with a size of 256Mbyte. The work memory is not
buffered and is deleted after shut down. Please regard that also registry entries are
stored in the work memory that are set back to default settings after the next re-boot.
As internal permanent storage medium every Touch Panel has a flash disk with a size of
128Mbyte. After the start of Windows
Ò
CE this memory is listed as
Flashdisk
at
My
Device.
The connection of USB sticks and USB drives by use of the "Host"-USB-A interface is
supported by the Touch Panel. After connection the storage media is listed as
Hard Disk
at
My Device
.
At the back of the Touch Panel there are the card slots for memory cards. At this slot you
may plug storage modules of the type SD. The card may be plugged and removed during
runtime and is immediately listed as
SDMMC Card
at
My Device.
2.4 Dimensions
For the installation of the Touch Panel in control cabinets and desks the following dimen-
sions are necessary:
Overview
Work memory
Flash disk
USB storage media
Slot for SD
Installation dimensions
VIPA HMI
Hardware description
Dimensions
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
15
