manualshive.com logo in svg

YASKAWA VIPA System SLIO, Руководство пользователя

Поделиться
Скачать
YASKAWA VIPA System SLIO Скачать руководство пользователя страница 32

2.6  Demounting

2.6.1  Demounting CPU 01xC

By means of a screwdriver there is the possibility to remove the connectors e.g. for

module exchange with a fix wiring. For this each connector has a release lever centrally

on its top side. Unlocking takes place by the following proceeding:

1.

Power-off your system.

2.

Remove connector:

Push your screwdriver horizontally into the slot between connector and release

lever, until it stops.

3.

Push the screwdriver down

ð

The connector is unlocked and can be removed by turning downwards.

CAUTION!

Via wrong operation such as pressing, the screwdriver upward

the release lever may be damaged.

1.

For demounting and exchange of a (head) module or a group of

modules, due to mounting reasons you always have to remove the

electronic module right beside. After mounting it may be plugged

again.

Press the unlocking lever at the lower side of the just mounted right module and pull

it forward.

2.

Turn all the locking lever of the CPU to be exchanged upwards.

3.

Pull the CPU forward.

4.

For mounting turn all the locking lever of the CPU to be mounted upwards.

Proceeding

Remove connector

CPU replacement

VIPA System SLIO

Basics and mounting

Demounting > Demounting CPU 01xC

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

32

Содержание VIPA System SLIO





























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды