manualshive.com logo in svg

YASKAWA VIPA System SLIO, Руководство пользователя

Поделиться
Скачать
YASKAWA VIPA System SLIO Скачать руководство пользователя страница 20

2.4  Mounting

Requirements for UL compliance use

–

Use for power supply exclusively SELV/PELV power supplies.

–

The System SLIO must be installed and operated in a housing

according to IEC 61010-1 9.3.2 c).

2.4.1  Mounting CPU 01xC

There are locking lever at the top side of the CPU. For mounting and demounting these

locking lever are to be turned upwards until these engage. Place the CPU at the

mounting rail. The CPU is fixed to the mounting rail by pushing downward the locking

levers. The CPU is directly mounted at a mounting rail. Up to 64 modules may be

mounted. The electronic and power section supply are connected via the backplane bus.

Please consider here that the sum current of the electronic power supply does not

exceed the maximum value of 1A. By means of the power module 007-1AB10 the current

of the electronic power supply may be expanded accordingly.

1.

Mount the mounting rail! Please consider that a clearance from the middle of the

mounting rail of at least 80mm above and 60mm below, respectively 80mm by

deployment of shield bus carriers, exist.

Proceeding

VIPA System SLIO

Basics and mounting

Mounting > Mounting CPU 01xC

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

20

Содержание VIPA System SLIO





























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды