manualshive.com logo in svg

YASKAWA VIPA System SLIO, Руководство пользователя

Поделиться
Скачать
YASKAWA VIPA System SLIO Скачать руководство пользователя страница 111

4.16  Deployment storage media - VSD, VSC

At the front of the CPU there is a slot for storage media. Here the following storage media

can be plugged:

n

VSD - 

V

IPA 

SD

-Card

–

External memory card for programs and firmware.

n

VSC - 

V

IPA

S

et

C

ard

–

External memory card (VSD) for programs and firmware with the possibility to

unlock optional functions like work memory and field bus interfaces.

–

These functions can be purchased separately.

–

To activate the corresponding card is to be installed and a 

Overall reset

 is to be

established. 

Ä

 Chap. 4.13 ‘Overall reset’ page 105

To avoid malfunctions, you should use memory cards of VIPA. These cor-

respond to the industrial standard. A list of the currently available VSD

respectively VSC can be found at www.vipa.com

You can cause the CPU to load a project automatically respectively to execute a com-

mand file by means of pre-defined file names.

VSDs are external storage media based on SD memory cards. VSDs are pre-formatted

with the PC format FAT 16 (max. 2GB) and can be accessed via a card reader. After

PowerON respectively an overall reset the CPU checks, if there is a VSD with data valid

for the CPU.

Push the VSD into the slot until it snaps in leaded by a spring mechanism. This ensures

contacting. By sliding down the sliding mechanism, a just installed VSD card can be pro-

tected against drop out.

To remove, slide the sliding mechanism up again and push the storage media against the

spring pressure until it is unlocked with a click.

CAUTION!

If the media was already unlocked by the spring mechanism, with shifting

the sliding mechanism, a just installed memory card can jump out of the

slot!

The VSC is a VSD with the possibility to enable optional functions. Here you have the

opportunity to accordingly expand your work memory respectively enable field bus func-

tions. Information about the enabled functions can be shown via the web page. 

Ä

 Chap.

4.11 ‘Accessing the web server’ page 93

Overview

VSD

VSC

VIPA System SLIO

Deployment CPU 013-CCF0R00

Deployment storage media - VSD, VSC 

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

111

Содержание VIPA System SLIO





























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды