YASKAWA Varispeed V7 Series, Быстрый старт

Страница: 16 / 34

16
4. Operator Use
Appearance Name Function
Data display Displays relevant data, items, such as frequency reference, output
frequency and parameter set values.
FREQ adjuster Sets the frequency reference within a range between 0Hz and the
maximum frequency.
FREF Indicator The frequency reference can be monitored or set while this indicator is lit.
FOUT Indicator The output frequency of the inverter can be monitored while this indicator is
lit.
IOUT indicator The output current of the inverter can be monitored while this indicator is lit.
MNTR indicator The values set in U-01 through U-19 are monitored while this indicator is lit.
F/R indicator The direction of rotation can be selected while this indicator is lit when
operating the inverter with the run key.
LO/RE
indicator The operating of the inverter though the Digital Operator or according to
the set parameters is selected while this indicator is lit.
Note: The status of this indicator can be only monitored while the inverter
is in operation. Any RUN command input is ignored while this indicator is lit.
PRGM
indicator The parameter in n01 through to n179 can be set or monitored while this
indicator is lit.
Note: while the inverter is in operation, the parameters can be only
monitored and only some parameters can be changed. Any RUN
command input is ignored while this indicator is lit.
Mode Key Switches the setting and monitor item indicator in sequence. Parameter
being set will be cancelled if this key is pressed before entering the setting.
Increment Key Increases multi-function monitor numbers, parameter numbers and
parameters set values.
Decrement Key Decreases multi-function monitor numbers, parameter numbers and
parameters set values.
Enter Key Enters multi-function monitor numbers, parameter numbers and internal
data values after they are set or changed.
Data Display
Indicators
(Setting Monitor
item indicators)
Operation keys
FREQUENCY
adjuster
MIN MAX