3.2 Commissioning
CAUTION!
– Before commissioning the device must be brought to
room temperature.
– At condensation the device must be absolutely dry
before connected to power.
– To avoid overheat during operation the device must not
be laid open to direct sun light.
– After opening the control cabinet or desk, there are
parts with possible dangerous voltage available.
– For all signal connections only screened cables are
permitted.
– Signal cables must not be let within the same cable
shaft as high voltage cables.
3.2.1 VIPA Startup-Manager
As soon as the Touch Panel is provided by power supply, the
VIPA
Startup-Manager
will be loaded.
At the first startup of the
VIPA Startup-Manager
the following
start
screen
appears.
There is a button on the
initial screen
with a counter, which counts
backwards. If you click on this button within this time, the project will
start. If the time expires, the project will start automatically. With the
button
‘Main’
you get to the
selection menu
.
A delay time of 5 seconds is default. In the
selection menu
under
"Autostart" you can adjust this time.
There are following buttons in the
selection menu
:
n
Settings
n
Info/Update
n
Autostart
Start screen
Selection menu
VIPA HMI
Deployment Touch Panel
Commissioning > VIPA Startup-Manager
HB160 | TP | 62G-FID0 | GB | 15-36
25
