8.2 Servomotor Main Circuit Cables
8.2.2 Main Circuit Cables for SGM7E and SGM7F-
A to -
D Motors
8-8
8.2.2
Main Circuit Cables for SGM7E and SGM7F-
A to -
D Motors
Selection Table
*1.
Replace the boxes (
) in the order number with the cable length (03, 05, 10, 15, or 20).
*2.
Use Flexible Cables for moving parts of machines, such as robots.
*3.
The recommended bending radius (R) is 90 mm or larger.
Note: 1. Refer to the following section for information on connector specifications, manufacturers, and order num-
bers.
D Servomotors, SGMCV Servomotors, and SGMCS Small-
2. Refer to the following section for information on wiring material specifications and order numbers.
Main Circuit Cables for SGM7E Servomotors and SGMCS Small-Capacity, Coreless Servomotors
Main Circuit Cables for SGM7F-
D Servomotors and SGMCV Servomotors
Wiring Specifications
Servomotor
Model
Flange
Specifi-
cation
Code
(6th
Digit in
Model
Number)
Length
(L)
Order Number
*1
Appearance
Standard Cable
Flexible Cable
*2, *3
SGM7E-
SGM7F-
A
to -
D
1
Non-
load side
installa-
tion
3 m,
5 m,
10 m,
15 m,
and
20 m
JZSP-CMM60-
-E
JZSP-C7MDN23-
-E
4
Non-
load side
installa-
tion (with
cable on
side)
JZSP-CMM00-
-E
JZSP-C7MDS23-
-E
L
Motor end
S
ERVOPACK end
L
Motor end
S
ERVOPACK end
Pin
S
ignal
S
ignal
Wire Color
1
2
3
4
Motor end
FG
Pha
s
e W
Pha
s
e V
Pha
s
e U
FG
Pha
s
e W
Pha
s
e V
Pha
s
e U
Green/(yellow)
Blue
White
Red
S
ERVOPACK end