7.4 Jog Speed Table Operation
7.4.4 S Procedures
7-47
7
Operation with Digital I/O
Writing the Jog Speed Table
You can write the edited jog speed table to SERVOPACK RAM to operate the SERVOPACK
according to the program.
1.
Click the
Write
Button on the Jog Speed Table Editing Dialog Box.
The Write Dialog Box will be displayed.
2.
Click the
OK
Button.
The jog speed table edited on the S will be written to the SERVOPACK and the edited cells
will change to white.
Comment
Button
Lets you add a comment.
Import
Button
Imports a jog speed table from a file saved on the computer to the S.
Initialize
Button
Initializes the flash memory in the SERVOPACK.
Save
Button
Saves the settings in the SERVOPACK to flash memory.
Read
Button
Reads the settings in the SERVOPACK to the S.
Write
Button
Writes the currently displayed settings to the SERVOPACK.
1. Make sure that the system is in SERVO OFF state when you write the jog speed table.
2. The jog speed table that is written will be deleted when the power supply to the SERVOPACK is
turned OFF. Before you turn OFF the power supply to the SERVOPACK, save the jog speed table
from RAM to flash memory. Refer to the following section for the operating procedure.
Continued from previous page.
No.
Item
Description
Important
