12.5 Maintenance Monitoring
12.5.1 Maintenance Data
12-31
12
Function
s
of the Contr
oller
S
ection
12.5
Maintenance Monitoring
You can use maintenance monitoring to monitor maintenance data in the SERVOPACK.
12.5.1
Maintenance Data
The maintenance data that you can monitor are listed in the following table.
12.5.2
Setting Procedure
Use the following procedure to set the maintenance data.
1.
Click the
Maintenance Monitor Settings
Button from the Start Tab Page in the MPE720.
If you use maintenance monitoring at the same time as the S, both the S
and maintenance monitoring may become slower.
Information
Data Category
Detailed Contents
Installation environment
data
Temperature environment load status of SERVOPACK and Servomotors
Power consumption data
Power consumptions of SERVOPACKs and Servomotors
Life estimation data
•
Total operating times of SERVOPACKs
•
Remaining lives of consumable parts (internal fans, capacitors, inrush-cur-
rent prevention circuits, and dynamic brake circuits)
