5.1 Manipulating Parameters (Pn
)
5.1.3 Parameter Setting Methods
5
Device-
S
pecific
S
etting
s
5-7
5.1.3
Parameter Setting Methods
You can use the S to set parameters.
Use the following procedure to set the parameters.
1.
Click the
Servo
Drive
Button in the workspace of the Main Window of the Sig-
maWin+.
2.
Select
Edit Parameters
in the Menu Dialog Box.
The Edit Parameters Dialog Box will be displayed.
3.
Click the cell of the parameter to edit.
If the parameter to edit is not displayed in the Edit Parameters Dialog Box, click the
or
Button
to display the parameter to edit.
4.
Change the setting of the parameter.
5.
Press the
Enter
Key.
The background of the edited parameter cell will change to green.
1. For a parameter for a numeric setting, enter the numeric setting.
2. If the parameter requires selection of a function, select the function from the list of
selections.
Information
