4.3 Self Configuration
4.3.5 Setting the Scan Times
4
Pr
eparation
s
4-43
4.3.5
Setting the Scan Times
This section describes how to set the scan times for the high-speed and low-speed scans.
Select
Setup
−
Scan Time Setting
from the item tree of the Environment Setting Dialog Box.
Alternatively, select
Setup
−
Scantime setting
from the Launcher. The following dialog box will
be displayed.
High-speed (H) Scan
This section describes how to set the scan time of a high-speed processing program (H, H
,
or H
.
) in milliseconds.
The setting that is set here will determine the reference pulse distribution cycle (accuracy).
The following table shows the different high-speed scan time settings depending on whether
the MP2000 Option Module is used.
There are restrictions on the setting of the high-speed scan time. Refer to the following section
for details.
High-speed Scan Time Setting Restrictions
MP2000 Option Module
Possible Settings
Used
0.5 ms to 32.0 ms (in increments of 0.5 ms)
Not used
0.5 ms to 32.0 ms (in increments of 0.250 ms)
The default high-speed scan time is 4.0 ms.
Information
