Yaskawa Solectria Solar
DOCR-071069
Page
5
of
24
3. INSTALATION
3.1 Delivery
Check for Damage
: Yaskawa Solectria Solar thoroughly inspects and rigorously tests all rack-
mounted components in the PVS-500 DC-Coupled Storage System -- before shipment. On
rare occasions damage may occur during shipping. Upon receipt of the PVS-500 system,
check for the following:
Inspect the AC Combiner as received, pre-mounted and pre-wired on the PVS-
500 rack.
If damage is observed, take digital photos to document the damage and
immediately report the damage to the shipping company.
If the recipient has any question about the potential shipping damage, contact
Yaskawa Solectria Solar (see Section 6 for contact information).
If Yaskawa Solectria Solar determines that the AC Combiner must be returned,
obtain an RMA number from Yaskawa Solectria Solar and instructions for
returning the unit.
3.2 Placement and Anchoring
To anchor the PVS-500 to a concrete pad, secure anchor bolts at each of the four anchoring
provisions located at each end of the horizontal support bars. These anchor points have an
internal diameter opening of 1”.
