YASKAWA OYMC V1000, Руководство по программированию

Страница: 33 / 408

1.1 A: Initialization
YASKAWA ELECTRIC SIEP C710606 10A YASKAWA AC Drive - V1000 PRELIM. Programming Manual 33
Pa
ra
m
et
er D
et
ai
ls
1
Table 1.18 Traveling: Preferred Parameters (A2-01 to A2-16):
■
A1-07: FBD’s Function Selection
FBD’s is a software package that can be used to customize the drive functionality or add
PLC functionality by the interconnection and configuration of basic software function
blocks. The drive performs the program created by the user in 2 ms cycles.
Parameter A1-07 can be used to enable or disable the FBD’s program inside the drive.
Note: 1. If FBD’s assigned functions to any multi-function output terminals, those functions stay set after
disabling FBD’s.
2. For more information on FBD’s, contact an OYMC representative.
Setting 0: FBD’s Disabled
Setting 1: FBD’s Enabled
Setting 2: Digital Input
If a digital input is programmed for FBD’s enable/disable (H1- = 9F), FBD’s will be
enabled when the input is disabled.
◆
A2: Preferred Parameters
■
A2-01 to A2-32: Preferred Parameters
The user can select 32 parameters and assign them to A2-01 through A2-32. This saves time
later scrolling through the parameter menu. The list of Preferred Parameters can also track
the most recently edited settings and save those parameters to this list.
No. Parameter Name No. Parameter Name
b1-01 Frequency Reference Selection d1-03 Frequency Reference 3
C1-01 Acceleration Time 1 E2-01 Motor Rated Current
C1-02 Deceleration Time 1 H1-05
Multi-Function Digital Input Terminal
S5 Function
C6-02 Carrier Frequency Selection H1-06
Multi-Function Digital Input Terminal
S6 Function
d1-01 Frequency Reference 1 H2-01
Terminals MA, MB, and MC Function
Selection
d1-02 Frequency Reference 2 L1-01 Motor Overload Protection Selection
No. Parameter Name Setting Range Default
A1-07 FBD’s Function Selection 0 to 2 0