
viii
Safety Precautions
The following signal words and marks are used to indicate safety precautions in this manual.
Information marked as shown below is important for safety. Always read this information and heed
the precautions that are provided.
The following precautions are for storage, transportation, installation, wiring, operation, mainte-
nance, inspection, and disposal. These precautions are important and must be observed.
General Precautions
Indicates precautions that, if not heeded, could possibly result in loss of
life or serious injury.
Indicates precautions that, if not heeded, could result in relatively serious
or minor injury, or property damage.
If not heeded, even precautions classified as cautions (
) can
lead to serious results depending on circumstances.
Indicates prohibited actions. For example,
indicates prohibition of
open flame.
Indicates mandatory actions. For example,
indicates that grounding
is required.
WARNING
The installation must be suitable and it must be performed only by an experienced technician.
There is a risk of electrical shock or injury.
Before connecting the machine and starting operation, make sure that an emergency stop pro-
cedure has been provided and is working correctly.
There is a risk of injury.
Do not approach the machine after a momentary interruption to the power supply. When power
is restored, the Machine Controller and the device connected to it may start operation suddenly.
Provide safety measures in advance to ensure human safety when operation restarts.
There is a risk of injury.
Do not touch anything inside the Machine Controller.
There is a risk of electrical shock.
Do not remove the front cover, cables, connector, or options while power is being supplied.
There is a risk of electrical shock, malfunction, or damage.
Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch the cables.
There is a risk of electrical shock, operational failure of the Machine Controller, or burning.
Do not attempt to modify the Machine Controller in any way.
There is a risk of injury or device damage.
WARNING
CAUTION
CAUTION
PROHIBITED
MANDATORY
Содержание MP3000 Series
Страница 153: ...4 1 User Program Types and Execution Timing 4 1 2 Motion Programs 4 20 Ladder Program Example...
Страница 212: ...5 4 Tuning 5 70 5 4 1 Using SigmaWin When Using a Servo 5 70 5 4 2 Using DriveWizard Plus When Using an Inverter 5 70...
Страница 274: ...5 3 Monitoring Machine Operation 5 3 3 Realtime Tracing 5 64...