4.1 User Program Types and Execution Timing
4.1.4 The M-EXECUTOR
4-32
M-EXECUTOR Detail Settings
The detailed settings for the M-EXECUTOR are performed on the Module Configuration Tab
Page and the Detail Definition Dialog Box.
This section provides the procedures to display this tab page and dialog box, and describes
their contents.
Module Configuration Definition Tab Page
Use the following procedure to display the Module Configuration Definition Tab Page.
•
Click the
Module Configuration
Icon
from the Start Tab Page.
The information on the M-EXECUTOR is displayed in row 05 of the
Function Module/Slave
Col-
umn.
The following table describes the M-EXECUTOR items that are displayed on the Module Con-
figuration Definition Tab Page.
No.
Item
Display/Setting Item
Editing
Function Module/Slave
Displays whether the M-EXECUTOR is enabled.
•
UNDEFINED: Disabled
•
M-EXECUTOR: Enabled
Possible
Status
Displays the status of the M-EXECUTOR.
Possible
Circuit No./Axis Address
Not used.
“----” is always displayed.
Not possi-
ble
Motion Register
Not used.
“----” is always displayed.
Not possi-
ble
Continued on next page.
Содержание MP3000 Series
Страница 153: ...4 1 User Program Types and Execution Timing 4 1 2 Motion Programs 4 20 Ladder Program Example...
Страница 212: ...5 4 Tuning 5 70 5 4 1 Using SigmaWin When Using a Servo 5 70 5 4 2 Using DriveWizard Plus When Using an Inverter 5 70...
Страница 274: ...5 3 Monitoring Machine Operation 5 3 3 Realtime Tracing 5 64...