YASKAWA Motoman UP6, Инструкция по эксплуатации

Страница: 246 / 561

3.14 Number Key Customize Function
3-88
3.14.5
Execution of Allocation
"
Executing the Instruction/Output Control Allocation
*1
The allocated instruction is displayed in the input buffer line.
*2
The instruction displayed in the input buffer line is registered.
"
Executing the Job Call Allocation
*1
The CALL instruction is displayed in the input buffer line.
*2
The CALL instruction displayed in the input buffer line is registered.
"
Executing the Display Allocation
*1
The allocated display is shown. At the same time, the reserved display key
lights up. Press the allocated key again to turn off the reserved display key and
return to the previous display.
"
Executing the I/O Control Allocation
*1
Allocated functions are executed.
Press the key allocated for instruction allocation or output control allocation
*1
Press
[INSERT] and [ENTER]
*2
Press the key allocated for the job call allocation
*1
Press [INSERT] and [ENTER]
*2
Press the key allocated for the display allocation
*1
Press [INTERLOCK] and the key allocated for I/O control allocation at the same time
*1
O peration
Explanation
=> W A I T IN#(1) =ON
O peration
Explanation
=> C A L L J O B : A R C O N
O peration
Explanation
O peration
Explanation