1.2.1
Connecting USB type key
Check and execute the following items before connecting the key to USB port.
<Check the computing environment>
Multi-connection of USB type key is not available for one USB port because of hardware
structure. Therefore, only one key should be connected to one USB port. When installing
multiple Yaskawa offline software into one personal computer and multi-connecting USB keys,
use the personal computer which is provided same numbers of USB ports as the number of
software to be installed.
<Installation of driver>
Be sure to install the driver
with key detached
from personal computer.
Execute "\SentinelDriver\SSD5411-32bit.EXE" of installation CD-ROM. Refer to
"\SentinelDriver\Manual\us\Readme.pdf" for the installation procedure.
Note: 1. When installing the driver under Windows 2000/XP environment, be sure to
login on administrator mode in order to add files to system folder and input
information in registry.
2. If a key is connected to personal computer before installing the driver, Windows
wizard ([Add New Hardware] Wizard) starts up. In this case, push [cancel], and
detach the key from personal computer and then install the driver.
1.2.2
Connecting D-sub type key
Connecting the key to the printer port(
).
<Installation of driver>
Execute "\SentinelDriver\SSD5411-32bit.EXE" of installation CD-ROM. Refer to
"\SentinelDriver\Manual\us\Readme.pdf" for the installation procedure.
Note: 1. Be sure to install the driver in case of operation under Windows 2000/XP environment.
2. When installing the driver under Windows 2000/XP environment, be sure to login on
the administrator mode in order to add files to system folder and input information in
registry.
3. Refer to "4.1 Frequently-asked questions" for other countermeasures concerning
hardware lock key.
6/31
HW0482335
