YASKAWA MOTOMAN-MH5F страница 86 Скачать руководство пользователя

Страница: 86 / 99

10 Cable Wiring
10.2Connecting Cables

10-6

176183-1CD

HW1483638

MH5S

(II)

/MH5F

10.2

Connecting Cables

10.2.1 S-Head and Base

• Refer to

Table 10-3 “Checklist for Cable Wiring Parts in S-Head and

Base”

and

Fig. 10-3 “Cable Wiring in S-Head and Base”

1. Insert the internal wiring harness mounted the base connector in the

S-head from the back side of the manipulator.

2. Mount the support on the internal wiring harness. Mount the

saddle on the spring part of the internal wiring harness (at the
second or third winding from the top). Then fix it with the GT-SA
bolt .

3. Mount the support on the S-head with the GT-SA bolts .

Tighten

the GT-SA bolts with a tightening torque shown in

Table 10-3

4. Connect the connector of the S-axis motor to the internal wiring

harness and remove the backup battery.

5. Push the internal wiring harness in the base and accommodate it. At

this time, be very careful not to pinch the cable between the base and
the connector.

6. After accommodate the internal wiring harness, mount the base

connector on the base with the hexagon socket button head
screws .

7. Insert the internal wiring harness to the L-arm side.

8. Mount the cover with the hexagon socket button head screws .

10.2.2 U-Arm and Casing

• Refer to

Table 10-2 “Checklist for Cable Wiring Parts in Casing and

L-Arm”

a nd

Fig. 10-2 “Cable Wiring in Casing and L-Arm”

1. Insert the internal wiring harness in the casing.

2. Connect the connectors of the L- and U-axis motors to the internal

wiring harness and remove the backup batteries.

3. Mount the saddles

on the spring part of the internal wiring

harness (at the second or third winding from the top). Fix it with the
hexagon socket head cap screws

and the white-marked part of

the internal wiring harness with the cable tie.

4. Mount the cover on the L-arm with the hexagon socket button head

screws .

5. Mount the support on the internal wiring harness in the casing.

Mount the saddle  on the spring part of the internal wiring harness (at
the second or third winding from the top).  Fix it with the hexagon
socket head cap screw  and the white-marked part of the internal
wiring harness with the cable tie.

6. Connect the connector of the R-axis motor to the internal wiring

harness and remove the backup battery.

7. Insert the internal wiring harness in the wrist unit.

8. Mount the support on the casing with the hexagon socket head cap

screws .

10 12

86 of 99

Содержание MOTOMAN-MH5F




































































































Результаты поиска

Содержание MOTOMAN-MH5F

Отзывы:

Похожие инструкции для MOTOMAN-MH5F

Бренды по названию

Популярные бренды

YASKAWA MOTOMAN-MH5F, Руководство по обслуживанию

Результаты поиска

Содержание MOTOMAN-MH5F

Отзывы:

Похожие инструкции для MOTOMAN-MH5F

Бренды по названию

Популярные бренды