YASKAWA Motoman DX200, Руководство оператора, Страница: 23 / 75

2-7
169861-1CD
HW1482771
2 Setup
2.5 System Configuration
Weldcom Function: Arc
Welding Digital I/F
1. Select {SYSTEM}
→
{SETUP}
→
{OPTION FUNCTION}, and then
“DETAIL” of “NETWORK”.
2. Change the setting of “DEVICE” from “NOT USED” to “Ethernet”, and
select “DETAIL” of “HOST SETUP”.
– Set the Network (Ethernet) function to enable.
3. After setting “IP ADDRESS SETTING” to “MANUAL SETTING”,
change “IP ADDRESS” to “192.168.255.200”.
• Set “SUBNET MASK” to “255.255.255.0”.
• Set “DEFAULT GATEWAY” to “0.0.0.0”.
4. After the setting above is completed, press the [ENTER]. When a
confirmation dialog appears, select {Yes} to confirm the setting.
2.5.3 Setting of Optional Function “WELDCOM Function”
Set the WELDCOM function by following the procedure below.
1. Select {SYSTEM}
→
{SETUP}
→
{OPTION FUNCTION}, and then
“DETAIL” of “WELDCOM FUNC. (ARC DIGITAL I/F)”.
23 of 75