YASKAWA MOTOMAN DX100 Скачать руководство пользователя страница 533

Страница: 533 / 554

10-7

155507-1CD

RE-CSO-A037

DX100

10 Handling Application
10.2 Registering Instructions

10.2

Registering Instructions

10.2.1 HAND

Instruction

This instruction turns ON/OFF the gripper valve signal and controls the
tool.

1. Select {JOB} under the main menu.

2. Select {JOB}.

3. Press [TOOL 1 ON/OFF] or [TOOL 2 ON/OFF].

– “HAND 1 ON” is displayed if [TOOL 1 ON/OFF] is pressed; “HAND 2

ON” is displayed if [TOOL 2 ON/OFF] is pressed in the input buffer
line.



If “HAND” is selected after pressing [INFORM LIST], “HAND 1 ON”
is displayed.

– To register the instruction shown in the input buffer line without

editing, press [INSERT] and then press [ENTER].

4. Select the gripper number and edit.

– The input line is displayed.

– Input the gripper number with the Numeric keys, and press

[ENTER].

5. Select the gripper output status and edit.

– If the UP or DOWN ARROW cursor is pressed together with

[SHIFT], “ON” and “OFF” are alternately displayed.

– If no settings are to be made for other additional items, press

[INSERT] and then press [ENTER]. The HAND instruction is
registered.

HAND

1 ON

Tool_no=

HAND ON

HAND

HAND 1

OFF

533 of 554

Содержание MOTOMAN DX100











































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MOTOMAN DX100

Отзывы:

YASKAWA MOTOMAN DX100, Руководство оператора, Страница: 533 / 554

Результаты поиска

Содержание MOTOMAN DX100

Отзывы: