manualshive.com logo in svg

YASKAWA MOTOMAN DX100, Руководство оператора, Страница: 321 / 554

Поделиться
Скачать
YASKAWA MOTOMAN DX100 Скачать руководство пользователя страница 321

6-81

155507-1CD

RE-CSO-A037

DX100

6     Convenient Functions
6.8  Simple Menu Function

6.8.3.2 Conditions 

when Calling Up the Layout

There are some cases where the layout cannot be called up depending on 
the conditions when calling up.

Followings are the conditions and the messages that the layout is refused 
to be called up.

When undisplayed screen is included in the layout to be called up due to 
above mentioned reasons, the message, “Please selected a Main Menu” 
appears to the said screen.

6.8.4  Editing “USER DEFINITION” Menu

Editing procedures of “changing the registered name” and “deleting the 
registered item” are possible to the items registered to “USER 
DEFINITION MENU” window.

Those editions are executed on “USER DEFINITION MENU” window.  
Displaying of “USER DEFINITION MENU” window is possible in the 
operation mode or more and editing of this menu is possible in the editing 
mode or more.

6.8.4.1 Displaying 

“UNSER DEFINITION” Window 

Displays “UNSER DEFINITION MENU” Window with {EDIT} button.

1. Press [SIMPLE MENU] key or select {Simple Menu} button at the 

lower-left on the display.

– “USER DEFINITION MENU” menu appears.

Condition

Message

1 When 

all 

the 

registered layout 
windows cannot be 
displayed due to 
security mode or its 
purpose of use.

There are no windows to display within the chosen 
layout.

321 of 554

Содержание MOTOMAN DX100











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов