manualshive.com logo in svg

YASKAWA MOTOMAN DX100, Руководство оператора, Страница: 314 / 554

Поделиться
Скачать
YASKAWA MOTOMAN DX100 Скачать руководство пользователя страница 314

6     Convenient Functions
6.7  Multi Window Function

6-74

155507-1CD

RE-CSO-A037

DX100

6.7.5  Switching the Axis Operation Control Group

The appropriate control group for axis operation is automatically selected 
in accordance with the window status or its operation in the active window.  
Due to this function, when the general-purpose display area is in multi 
window mode, the control group for axis operation can vary depending on 
the window which is active at the time.

To avoid unexpected control group to function and for the better safeness, 
the change of the control group with the [MULTI] key operation or touching 
operation when switching the active window is notified to the user.

6.7.5.1  S2C540 “Choosing Method of Notifying the Change of Axis Operation 

Control Group when Switching the Active Window”

The method to notify the change of control group for axis operation due to 
the switch of active window can be changed with parameter.

• Setting Value:0

– Keep displaying the message in the human interface display area 

for three seconds.

– Message “Control group switched by switching the active window” is 

displayed.

SUPPLE-

MENT

The change of the control group for axis operation due to 
other than [MULTI] key operation or touching operation; due 
to the switch of the window by selecting main menu, is not 
notified to the user.

314 of 554

Содержание MOTOMAN DX100











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов