B Illustrated Parts list
B.1 Introduction
B-1
162068-1CD
162068-1CD
MH-SERIES
POSITIONER
B
Illustrated Parts list
B.1
Introduction
This Illustrated Parts List identifies, describes, and illustrates detail parts
of the main assemblies for the MH-SERIES POSITIONER manufactured
by Yaskawa Motoman.
This list provides parts identification and descriptive information for use in
provisioning, requesting, purchasing, storing, and issuing spare parts.
B.1.1
Contents
The parts list contains a breakdown of the equipment into detail parts. All
parts of the equipment are listed except the following:
1. Standard hardware items (attaching parts) such as nuts, screws,
washers, etc., which are available commercially.
2. Bulk items such as wire, cable, sleeving, tubing, etc., which are also
commercially available.
3. Permanently attached parts which lose their identity by being welded,
soldered, riveted, etc., to other parts, or assemblies.
B.1.2
Parts List
This form is divided into four columns as follows:
1. “Figure - Item Number” Column
• This column lists the figure number of the illustration applicable to a
particular parts list and also identifies each part in the list by an item
number. These item numbers also appear on the illustration. Each
item number on the illustration is connected to the part to which it
pertains by a leader line and arrow. Thus, the figure and item num-
bering system ties the parts list to the illustrations and vice versa
2. “Motoman Part Number” Column
• All part numbers appearing in this column are Yaskawa Motoman
part numbers.
3. “Description” Column
• The item nomenclature appears in this column.
4. “QTY” Column
• This column indicates the quantity of parts required for an assembly
or subassembly in which the part appears. This column does not
necessarily reflect the total used in the complete end item.
80/101
