YASKAWA Lift Inverter L1000V, Техническое руководство, Страница: 33 / 282

2.2 Mechanical Installation
YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual 33
Mec
h
an
ic
al
In
st
al
lat
io
n
2
u
Digital Operator Remote Usage
n
Remote Operation
An optional digital LCD operator (JVOP-180) can be connected to the drive using an extension cable up to 3 m long to
facilitate operation when the drive is installed in a location where it can not be easily accessed.
The digital operator can also be permanently mounted in remote locations such as panel doors using an extension cable
and an installation support set (depending on the installation type).
Note: Refer to Drive Options and Peripheral Devices on page 206 for information on extension cables and installation support sets.
Figure 2.4
Figure 2.4 Digital LCD Operator Connection
n
Digital Operator Remote Installation
Digital Operator Dimensions
Figure 2.5 Digital Operator Dimensions
Installation Types and Required Materials
The digital operator can be mounted to an enclosure in two different ways:
1.
External/face-mount installs the operator outside the enclosure panel
2.
Internal/flush-mount installs the operator inside the enclosure panel
S / N : J007XE273710001
Operator
Drive
Communication Cable Connector
Comm Port
S / N : J007XE273710001
90
78
60
7.9
Minimum
50
Unit: mm
12.2 1.6
Installation holes (2-M3 screws, depth 5)
44
15
YEG