YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей

Страница: 481 / 566

Startup
Procedure
and
T
est
Run
6
6.6 Keypad Operation
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 481
◆
Configuring the Data Log Content
■
Set Monitor to Log
The procedure in this section shows how to set the monitor for which to log data.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
2.
Push (Menu).
3.
Push or to select [Diagnostic Tools], then push .
4.
Push or to select [Data Logger], then push (Setup).
5.
Push or to select [Log Monitor], then push .
6.
Push or to select the save-destination monitor parameter, then push .