YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей

Страница: 129 / 566

T
roubleshooting
2
2.6 Parameter Setting Errors
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 129
Code Name Causes Possible Solutions
oPE33 Digital Output Selection Error
These two parameters are set at the same time:
• H2-60 ≠ F [Term M1-M2 Secondary Function ≠
Not Used]
•
H2-01 = 1xx [Term M1-M2 Function Selection =
Inverse output of xx]
These two parameters are set at the same time:
• H2-63 ≠ F [Term M3-M4 Secondary Function ≠
Not Used]
•
H2-02 = 1xx [Term M3-M4 Function Selection =
Inverse output of xx]
These two parameters are set at the same time:
•
H2-66 ≠ F [Term M5-M6 Secondary Function ≠
Not Used]
• H2-03 = 1xx [Term M5-M6 Function Selection =
Inverse output of xx]
Clear the H2-01 to H2-03 = 1xx [Inverse output of xx] settings.
Note:
It is not possible to set H2-01 to H2-03 = 1xx [Inverse output of
xx] when using output functions for logic operations ( H2-60,
H2-63, H2-66 ≠ F ).
These parameter pairs are set incorrectly:
•
H2-21 [Comparator 1 Lower Limit] > H2-22
[Comparator 1 Upper Limit]
• H2-27 [Comparator 2 Lower Limit] > H2-28
[Comparator 2 Upper Limit]
•
Set parameters H2-21 ≤ H2-22 .
•
Set parameters H2-27 ≤ H2-28 .