YASKAWA FSDrive-MV1000 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 70

YASKAWA FSDrive-MV1000 Series Скачать руководство пользователя страница 8

8

YASKAWA ELECTRIC

EZZ010926 FSDrive-MV1000 Instructions

i.1 Before Using the Product

i.1

Before Using the Product

This manual is designed to ensure correct and suitable application of FSDrive-MV1000-Series Drives. Read this manual
before attempting to install, wire, operate, maintain, or inspect a drive and keep it in a safe, convenient location for future
reference. Also be sure that you understand all the precautions and safety information before attempting to use the
product.

◆

Applicable Documentation

The following manuals are available for MV1000 series drives. Refer to the manual appropriate for your purpose.

◆

Symbols

The symbols used in this manual are explained below.

Note:

Indicates important advice that must be followed. Also indicate low-level cautions that cause an alarm but do not involve a risk
of equipment damage, and supplementary notes.

◆

Terms and Abbreviations

◆

Trademarks

The companies and product names mentioned in this manual are trademarks or registered trademarks of those companies.

Super Energy-Saving Medium-Voltage AC Drive FSDrive-MV1000 Instruction Manual (this book)

Manual No.: EZZ010926

This manual contains basic information required to install and wire the drive, in addition to an overview of
operating procedures, fault diagnostics, and maintenance and inspection.
It covers the basic operation and trial running of this product.

Super Energy-Saving Medium-Voltage AC Drive FSDrive-MV1000 Parameter Guide

Manual No.: EZZ010930

This manual contains detailed information on parameter settings.
Use this manual to expand drive functionality and to take advantage of higher performance features.

TERMS

TERMS

TERMS

Indicates a term or definition used in this manual.

TERMS

TERMS

TERMS

•

Drive, MV1000:

Yaskawa FSDrive-MV1000 Series MV1000

•

V/f:

V/f Control

•

OLV:

Open Loop Vector Control

•

CLV:

Closed Loop Vector Control

•

PM motor:

Permanent Magnet Synchronous motor

«
...
6
7
8
9
10
...
»

Содержание FSDrive-MV1000 Series







































































Отзывы:

Нет отзывов