YASKAWA CR700, Техническое руководство, Страница: 627 / 886

Parameter
Details
11
11.5 d: References
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 627
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH] to identify the software version.
• The upper limit value changes when the
E1-04 [Maximum Output Frequency]
and
d2-01 [Frequency Reference Upper Limit]
values
change.
• This parameter sets the frequency reference of Multi-Step Speed 12.
■
d1-13: Reference 13
No.
(Hex.)
Name Description
Default
(Range)
d1-13
(028E)
RUN
Reference 13
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use U1-25
[SoftwareNumber FLASH] to identify the software version.
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 13.
■
d1-14: Reference 14
No.
(Hex.)
Name Description
Default
(Range)
d1-14
(028F)
RUN
Reference 14
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH] to identify the software version.
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 14.
■
d1-15: Reference 15
No.
(Hex.)
Name Description
Default
(Range)
d1-15
(0290)
RUN
Reference 15
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• On drives with software versions PRG: 01021 and later, this function is enabled.
The “ PRG ” column on the nameplate on the right side of the drive identifies the software version. You can also use U1-25
[SoftwareNumber FLASH] to identify the software version.
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• This parameter sets the frequency reference of Multi-Step Speed 15.
■
d1-16: Reference 16
No.
(Hex.)
Name Description
Default
(Range)
d1-16
(0291)
RUN
Reference 16
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection .
0.00 Hz
(0.00 - 590.00 Hz)
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV
V/f CL-V/f OLV CLV AOLV