background image

SAFETY

GENERAL SAFETY RULES

UNDERSTAND YOUR MACHINE

Read this manual and labels affixed to the machine to understand 
its limitations and potential hazards. 

be thoroughly familiar with the controls and their proper 
operation. Know how to stop the machine and disengage the 
controls quickly.

Make sure to read and understand all the instructions and safety 
precautions as outlined in the 

Engine Manufacturer’s

 manual 

packed separately with your unit. Do not attempt to operate the 
machine until you fully understand how to properly operate and 
maintain the engine and konw how to avoid accidental injuries 
and/or property damage.

If the unit is to be used by someone other than original purchaser, 
or is to be loaned, rented, or sold, always provide this manual 
and any needed safety training before operation. The user can 
prevent and is responsible for accidents or injuries that may occur 
to themselves, to other people, or to property.

Do not force the machine beyond its limits. Use the correct 
machine for your application.

PERSONAL SAFETY

Do not permit children to operate this machine at any time.

Keep children, pets, and other people not using the unit away 
from the work area. be alert and shut off the unit if anyone enters 
work area. Keep children under the watchful care of a responsible 
adult.

Do not operate the machine while under the influence of drugs, 
alcohol, or any medication that could affect your ability to use it 
properly.

Dress properly: Wear long, heavy pants, work boots, and work 
gloves. Do not wear loose clothing, short pants, or jewelry of any 
kind. Secure long hair so it is above shoulder level. Keep your 
hair, clothing, and gloves away from moving parts. loose clothes, 
jewelry, or long hair can be caught in moving parts.

Protect eyes, face, and head from objects that may be thrown 
from the unit. Always wear safety goggles or safety glasses with 
side shields when operating.

Wear appropriate hearing protection.

Always keep hands and feet away from all moving parts during 
operation. Moving parts can cut or crush body parts.

Always keep hands and feet away from all pinch points.

Do not touch parts that might be hot from operation. Allow parts 
to cool before attempting to maintain, adjust, or service.

Stay alert, watch what you are doing, and use common sense 
when operating the machine.

Do not overreach. Do not operate the machine while barefoot 
or when wearing sandals or similar lightweight footwear. Wear 
protective footwear that will protect your feet and improve 
your footing on slippery surfaces. Keep proper footing and 
balance at all times. This enables better control of the machine in 
unexpected situations.

INSPECT YOUR MACHINE

Check your machine before starting it. Keep guards in place and 
in working order. Make sure all nuts, bolts, etc., are securely 
tightened.

never operate the machine when it is in need of repair or is in 
poor mechanical condition. Replace damaged, missing, or failed 
parts before using it. Check for fuel leaks. Keep the machine in 
safe working condition.

Do not use the machine if the engine’s switch does not turn off 
the engine when running. Any gasoline powered machine that 
can’t be controlled with the engine switch is dangerous and must 
be replaced.

Regularly check to see that keys and adjusting wrenches are 
removed from the machine area before starting it. A wrench or 
a key that is left attached to a rotating part of the machine may 
result in personal injury.

Avoid accidental starting. be sure the engine’s switch is off before 
transporting the machine or performing any maintenance or 
service on the unit. Transporting or performing maintenance or 
service on a machine with its switch on invites accidents.

If the machine should start to vibrate abnormally, stop the 
engine (motor) and check immediately for the cause. Vibration is 
generally a warning sign of trouble.

ENGINE SAFETY

This machine is equipped with an internal combustion engine. Do 
not use on, or near, forest-covered or brush-covered land unless 
the exhaust system is equipped with a spark arrester meeting 
applicable local, state, or federal laws.

In the state of California, a spark arrester is required by law. 
Other states have similar laws. A spark arrester, if used, must be 
maintained in effective working order by the operator.

never start or run the engine inside a closed area. The exhaust 
fumes are dangerous, containing carbon monoxide, an odorless 
and deadly gas. Operate this unit only in a well-ventilated 
outdoor area.

5

YD8203PM01 - 1703

|

   Safety

09710US25M101.indd   5

2017/4/1   16:22:19

Содержание YD8203





























Отзывы: