Yardistry YM12978, Инструкция по установке и эксплуатации

Страница: 17 / 62

17
support@yardistrystructures.com
(Flat,Lock Washers, T-nuts)
28 - #8 x 2-1/2" W.S
(Flat,Lock Washers, T-nuts)
12- 5/16 x 3" Hex Bolts
8- 5/16 x 1-1/2" Hex Bolts
2- Long Beam Centre -(1046)
4- Beam Long End (1047)
4- Beam L0ng (1045)
2- Long Beam Insert (124)
(Flat,Lock Was
hers, T-nuts)
28 - #8 x 2-1/2
" W.S
(Flat,Lock Was
hers, T-nuts)
12- 5/16 x 3" He
x Bolts
8- 5/16 x 1-1/2
" Hex Bolts
2- Long Beam
Centre -(104
6)
4- Beam Long E
nd (1047)
4- Beam L0ng (104
5)
2- Long Beam
Insert (124)
Step 4: Long Beam Assembly
Part 1
A: Connect two (1045) Beam Longs using two 5/16 x 1-1/2” Hex Bolts (with 5/16” lock washer, 1/4-5/16” large
washer and 5/16” t-nut) as shown in F4.1 and F4.2.
B:
Connect one (1047) Beam Long End to each end of one (1046) Long Beam Centre using one 5/16 x 1-1/2”
Hex Bolts (with 5/16” lock washer, 1/4-5/16” large washer and 5/16” t-nut) in the top hole, per end as shown in
F4.1 and F4.2.
C: Repeat Steps A and B one more time to make two Beam Long Assemblies and two Long Beam End
Assemblies.
Hardware Wood Parts
4 x (1045) Beam Long
2 x (1046) Long Beam Centre
4 x (1047) Beam Long End 8 x 5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 1/4-5/16” large washer, 5/16” t-nut)
5/16” T-nut
F4.1
F4.2
1/4-5/16”
Large Washer
5/16 x 1-1/2”
Hex Bolt
Tight
5/16” Lock
Washer
5/16 x 1-1/2”
Hex Bolt
(1045)
Beam Long
(1046) Long
Beam Centre
(1047) Beam
Long End
Use top
holes
See Part 2
for this piece
Make sure bolt heads
are on the outside of
each Beam Assembly
(1045)
Beam Long
(1047) Beam
Long End