12
ASSEMBLY AND OPERATION INSTRUCTIONS
CAUTION
The pressure washer must only be used with clean water. Use of unfiltered water or corrosive
chemicals will damage the pressure washer.
This pressure washer is not intended to pump hot water. Never connect it to a hot water
supply as it will significantly reduce the life of the pump.
Fig. 14
Fig. 15
13. OFF position (Fig. 14)
Make sure the ON/OFF switch is on the OFF position before plugging in the unit, press the switch button
with mark “O” to ensure it is off.
14. Connect to power socket (Fig. 15)
Insert the plug into the power socket.
WARNING
The pressure washer is equipped with a main power “ON/OFF” (I/O) switch located on the
unit. It should always be moved to the “OFF” (O) position when the pressure washer is not
being used to prevent possible injury or damage.
Ground Fault Circuit Interrupter Protection
This device provides additional protection from the risk of electrical shock. Plug the Ground Fault Circuit
Interrupter (GFCI) into a power outlet. Indicator should turn red.
TEST BEFORE EACH USE.
Press the
“TEST” button. Red indicator should disappear. Press “RESET” button again for use. Do not use if above
test fails.
Fig. 12
Fig. 13
