manualshive.com logo in svg

Yanmar YDG Series, Руководство по эксплуатации, Страница: 15 / 92

Поделиться
Скачать
Yanmar YDG Series Скачать руководство пользователя страница 15

YDG Operation Manual

1

[ F I "Qr gtcvkqp"Ocpwcn

SAFETY

YANMAR considers safety of great importance and 
recommends that anyone that comes into close 
contact with its products, such as those that install, 
operate, maintain or service YANMAR products, 
exercise care, common sense and comply with the 
safety information in this manual and on the 
machine’s safety decals. Keep the decals from 
becoming dirty or torn and replace them if they are 
lost or damaged. Also, if you need to replace a part 
that has a decal attached to it, make sure you order 
the new part and decal at the same time.

DANGER

Indicates a hazardous situation which, if not 
avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not 
avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not 
avoided, could result in minor or moderate 
injury.

NOTICE

Indicates a situation which can cause damage to 
the machine, personal property and/or the 
environment or cause the equipment to operate 
improperly.

This safety alert symbol appears 
with most safety statements. It 
means attention, become alert, 
your safety is involved! Please read 
and abide by the message that 
follows the safety alert symbol.

Содержание YDG Series





























































































Отзывы:

Нет отзывов