Yanmar ViO80-1A, Руководство пользователя по эксплуатации и обслуживанию

Страница: 66 / 215

9 Options
49
9.6 Plug-in flashing light
DANGER
Keep three points of support with the machine to complete the installation safely.
If three points of stable support are not available, use suitable equipment to operate the
machine safely.
• The machine can be fitted
when this option is requested.
• The beacon kit includes the
beacon, a rear LED light, an elec-
trical harness and its support, and
two mountable switches in the
cockpit.
• To activate the flashing light attached to the rear of the cab, turn on the switch located in
the cab on the right of the driver's seat.
• To attach the flashing light:
1. Remove the protective cap from the pin's tip.
2. Insert the tip of the flashing light in the pin and tighten the nut located at the base of the
flashing light.
9.7 Keypad immobilizer
• The machine can be fitted when this option is requested.
• The theft deterrent keypad consists of an immobilizer box and a keypad installed in the
cockpit.
• For more information, consult the instructions supplied with the device.
1. Once the user code has been programmed, type
A, then the 4-digit code and press button V.
Note
When the code is recognised, the green light
(to the left) will light up.
2. Then turn the starter key within 60 seconds.