Yanmar ViO80-1A, Руководство пользователя по эксплуатации и обслуживанию

Страница: 105 / 215

4 Checks before starting the machine
88
4.4 Checking and topping up the fuel level
= Full
= Empty
1. Set the starter key to ON position.
2. Determine the fuel level by looking at the fuel
gauge on the dashboard.
3. Set the starter key to OFF position.
4. To top up the fuel level, you can use the machine's
filling pump.
8 Using the electric fuel filling pump
, page 45
Otherwise do the following:
a. Open cover B using the starter key.
b. Take the cap off the tank.
c. Top up through the filler hole, keeping an eye
on the gauge located on the tank.
Only use the recommended diesel :
• ISO 8217 DMX
• EN 590:96
Minimum cetane index: 45.
1= Cover B
2 = Cap
Temperatures °C
Quantity prescribed (L)
-
-20 -10 0 10 20 30
+
Diesel
N° 2-D
115,0 N° 3-D
N° 3-D (S)
WARNING
If you spill any fuel, wipe it up with a cloth.
1= Event
6. Close the tank again.
7. Close cover B.
Note
If the cap vent holes are plugged, the pressure in
the reservoir may vary and the fuel supply will
be faulty. To avoid this happening, clean these
vents air holes regularly.