TEM 3
It is a measurement instrument to convey the following information to the
user.
With only one button interface the select as indicated in the blue area.
Volts (V), Amps (A), Frequency (HZ), Working Hours (H)
Measurements can be seen in two different ways.
Manually, By means of the key “Select Mis”
In this case, by pressing the key repeatedly, you go on with the selection.
The selected measurement, besides appearing on the display, is also
emphasized by the lighting of the respective Led.
Automatically
In this way the various measurements automatically move in sequence on
the display with a 3 second scanning. If you want to stop the scanning on the
desired measurement, you only have to press the key “Select Mis”
To switch between Manual – Automatic mode is done by keeping the key
“Select Mis” pressed for 3 seconds to go from manual to automatic and once
from Automatic to Manual
18
