Yanmar SV26, Руководство пользователя по эксплуатации и обслуживанию

Страница: 118 / 205

10 Handling the bucket
101
Weight of material handled:
The bucket loading capacity (or SAE volume) allows calculating the weight of material
handled in the bucket (in case of full buckets) and it takes into account the extra weight caused
by the dome piling of certain materials.To determine the weight of materials handled, make the
following calculation:
Weight of materials (kg) = Load Capacity (L) x Density
Materials Density
Sand
1,64
Clay 1,7
Mud 1,8
Gravel 1,5
The density of the materials has a great influ-
ence on the weight of the load handled.The
opposite table specifies the density of the most
commonly handled materials.
10.2 Compatible accessories
• These accessories are given for 1.8 density materials with a full bucket forming a dome in ac-
cordance with ISO standard 7451. For particular operations or with materials of different densi-
ties (partial bucket filling due to fluid products such as mud) larger buckets may be used.
• In this case it is the responsibility of the user to ensure that the machine stability limit is not
exceeded. The machine could tip over, which could cause serious physical injuries and extensive
material damage.
10.1 Machine stability when using with a bucket or an accessory, page 99
• Do not use accessories that are not listed in this chapter. The user must ensure that the acces-
sory is compatible with the capabilities of the machine and the task at hand. If in doubt, contact
the accessory manufacturer or dealer.
WARNING
When using a large accessory, keep the accessory at a sufficient dis-
tance from the cab to avoid hitting the cabin with the accessory dur-
ing the rotation of the boom.