Yanmar 2V Series Скачать руководство пользователя | Manualshive

Страница: 11 / 112

background image

YANMAR WARRANTIES

2V Operation Manual

xi

Limited Emission Control System Warranty - USA Only - Continued

Exclusions:

Failures other than those arising from defects in material and / or workmanship are not covered by this
warranty. The warranty does not extend to the following: malfunctions caused by abuse, misuse, improper
adjustment, modification, alteration, tampering, disconnection, improper or inadequate maintenance or use
of non-recommended fuels and lubricating oils; accident-caused damage, and replacement of expendable
items made in connection with scheduled maintenance. Yanmar disclaims any responsibility for incidental or
consequential damages such as loss of time, inconvenience, loss of use of equipment / engine or
commercial loss.

Owner’s Warranty Responsibilities:

As the engine owner, you are responsible for the performance of the required maintenance listed in
your owner’s manual.

Yanmar recommends that you retain all documentation, including receipts, covering

maintenance on your non-road compression-ignition engine, but Yanmar cannot deny warranty solely for the
lack of receipts, or for your failure to ensure the performance of all scheduled maintenance.

Yanmar may deny your warranty coverage of your non-road compression-ignition engine if a part has failed
due to abuse, neglect, improper maintenance or unapproved modifications.

Your engine is designed to operate on diesel fuel only. Use of any other fuel may result in your engine no
longer operating in compliance with applicable emissions requirements.

You are responsible for initiating the warranty process. You must present your engine to a Yanmar dealer as
soon as a problem exists. The warranty repairs should be completed by the dealer as expeditiously as
possible. If you have any questions regarding your warranty rights and responsibilities, or would like
information on the nearest Yanmar dealer or authorized service center, you should contact Yanmar America
Corporation at 1-800-872-2867.

«
...
9
10
11
12
13
...
»

Содержание 2V Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для 2V Series

VLT AutomationDrive FC 300 Series

Бренд: Danfoss Страницы: 56

Бренд: Danfoss Страницы: 2

Vickers M2-200 Series

Бренд: Eaton Страницы: 13

Бренд: SEW-Eurodrive Страницы: 88

Бренд: Moons' Страницы: 28

Бренд: ABB Страницы: 13

Бренд: JVL Страницы: 306

Бренд: JVL Страницы: 347

Бренд: YS Страницы: 2

Бренд: O.S. engine Страницы: 4

Бренд: O.S. engine Страницы: 9

Бренд: Motion Страницы: 124

Бренд: NACIONAL MOTOR Страницы: 72

Бренд: Chevrolet Страницы: 17

Бренд: Rockwell Automation Страницы: 28

Бренд: Homelite Страницы: 8

Бренд: LEHR Страницы: 115

125cc LEOPARD TaG

Бренд: IAME Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды