ENGINE
TNV IDI Service Manual
6-31
Cylinder Head
Reassembly of Intake Manifold / Valve
Cover
1. Reinstall the glow plugs
(Figure 6-33, (1))
and
tighten to specification. Reinstall the electrical
harness
(Figure 6-33, (2))
.
Figure 6-33
2. Lightly grease a new valve cover gasket
(Figure 6-34, (4))
. Place the gasket in the
groove of the intake manifold / valve cover
(Figure 6-34, (3))
.
3. Place the valve cover on the cylinder head.
4. Reinstall and tighten bolts
(Figure 6-34, (1 and 2))
securely.
Figure 6-34
5. Reinstall the exhaust manifold using a new
gasket. Tighten the bolts and nuts
(Figure 6-34, (5 and 6))
securely.
6. Reinstall the fuel injectors.
the Fuel Injectors on page 7-28
7. Reinstall the high pressure and return fuel
injection lines.
8. Reinstall the coolant pump.
Engine Coolant Pump on page 8-8.
9. Reinstall the alternator.
(2)
(1)
0002146
(2)
(1)
(3)
(5)
(4)
(6)
(7)
(8)
00021
3
1
TNV_IDI_ServiceManual_A4.book 31 ページ ２０１２年２月２４日 金曜日 午前１０時２４分
