Yanmar 1GM10, Руководство по ремонту

Страница: 8 / 240

Chapter One
This shop manual covers the GM Yanmar ma-
rine diesel engine series identified in Table 1.
Troubleshooting, tune-up, maintenance and repair are
not difficult, if you know what tools and equipment to use
and what to do. Step-by-step instructions guide you
through jobs ranging from simple maintenance to com-
plete engine overhaul.
This manual can be used by anyone a first-time
do-it-yourselfer to a professional mechanic. Detailed
drawings and clear photographs provide all the informa-
tion needed to do the work right.
Some procedures in this manual require the use of
special tools. The resourceful mechanic can, in many
cases, think of acceptable substitutes for special tools.
However, using a substitute for a special tool is not recom-
mended, as it can be dangerous and may damage the part.
If a tool can be designed and safely made, but will require
some type of machine work, contact a local community
college or high school that has a machine shop curricu-
lum. Shop teachers sometimes welcome outside work that
can be used as practical shop applications for students.
Each Yanmar marine diesel can be identified by its indi-
vidual model number. The model numbers for all Yanmar
marine diesel engines covered in this manual are listed in
Table
1.
Some engine model numbers end with the letters F or D,
such as 2GMF or Suffix letter F indicates the en-
gine is equipped with a freshwater (closed) cooling sys-
tem. Suffix letter D indicates the engine is equipped with a
Kanzaki
OD transmission.
Except where specified, F and D series engines are in-
cluded when a basic model number is specified. For ex-
ample, if model 3GM is called out in a procedure, the
procedure also applies to 3GMD and
NOTE
Engine models ending with the letters
(sail drive) or V (V-drive transmission) are
not covered in this manual.
Metric and U.S. standards are used throughout this
manual. U.S. to metric conversions are in Table 2.
Critical torque specifications are provided at the end of
each chapter (as required). Use the general torque specifi-
cations listed in Table 3 if a torque specification is not
listed for a specific component or assembly.
Metric drill tap sizes are in Table
4.
Tables 1-4 are located at the end of the chapter.
MANUAL ORGANIZATION
This chapter provides general information useful to en-
gine owners and mechanics. In addition, this chapter