Yanmar 1GM, Руководство по эксплуатации

Страница: 20 / 56

V1. Starting the new engine for the first time
Important !
Before starting the engine for the first time check carefully the following
preparations.
[6-1.] Supply of fuel oil
1) Fill fuel into the fuel tank. When you feed fuel from storage tank, put the inlet of the syphon
at the middle of the storage tank. Take care not to draw unwanted materials floating on the fuel
surface or depositing in the bottom.
2) Draining the fuel tank. Be sure to equip the fuel tank with a precipitation tank, as shown in the
figure, and install a drain cock to remove any dirt and water that accumulate. Before starting the
engine. open the drain cock to remove any precipitation and dirt.
1. Precipitation Tank
2. Drain Cock
[6-2.] Supply of lubricating oil
1) Lube oil to the crankcase
1-a)
Remove the lube oil supply port (yellow cap) and supply approved lube oil.
FOR 1GM
1. Oil Supply Port