Yanmar 1GM, Руководство по эксплуатации

Страница: 14 / 56

1. Remote Control Cable
2. M5 Thread
3. Operation Lever
4. Shaft
5. Clutch Case side cover
6. Spring joint
3-a)-4
Move the remote control lever to the forward
position, and make sure that the M5 thread of the
spring joint reaches to the inside of the joint.
In this position, the output shaft (propeller shaft) of
the clutch should rotate clockwise as viewed from
the stern.
3-a)-5.
Move the remote control lever to the reverse position,
and make sure that the M5 thread of the spring joint
reaches the outside of the joint. In this position, the
output shaft (propeller shaft) of the clutch should rotate
counter-clockwise as viewed from the stern.
3-a)-6.
Adjust the M5 thread depth so that the value of A, and 16 are nearly the same.