Yamato YC12T1/I, Руководство по установке и эксплуатации

Страница: 9 / 38

Infrared signal
receiver
Manual Switch
Nixie tube
Running light
Timing light
D e f ro s t i n g/
preheat light
warning light
Buzzer
DISPLAY PANEL
Infrared signal receiver
: receive the signal from the remote controller.
To make your remote controller operation more efficient, please let remote controller
emitt or aim at infrared signal receiver.
Buzzer: firstly power supplied or any of remote controller operations will make the buzzer
sound once.
Some obstacles occuring in the system will be recognized by intelligent recognition
system of unit ,lighting on the DISPLAY PANEL flashing show the type of obstacles .
DISPLAY PANEL
1. It suits for Body dimension :840X245X840 or 840X290X840 cooling and heating pump type.
2. It suits for Body dimension :580X255X580 cooling and heating pump type.
LIGHTING ON
Timer indicator Operation indicator
PRE-DEF indicator
Pump indicator
INFRARED SIGNAL
RECEIVER
ON when preset time for switching ON/OFF the unit
ON when the unit is power on
ON when the water level is high
ON when the unit prevent cool air flowing in room.
Timer indicator
Operation indicator
PRE-DEF indicator
Pump indicator
The cooling function allows the air conditioner to cool the room and at
the same time reduces the humidity in the air.
To activate the cooling function ( COOL ) , press the MODE button
until the symbol
appears on the display.
The cooling cycle is activated by setting the keys or at a
temperature lower than that of the room.
To optimize the functioning of the conditioner, adjust the temperature (1) ,
the speed (2) and the direction of the air flow (3) by pressing the keys
indicated
▲ ▼
COOLING MODE
1
2
3
HEATING MODE
The heating function allows the air conditioner to produce hot air.
To activate the heating function ( HEAT ) , press the
MODE button until the symbol appears on the display.
With the keys or set a temperature higher than that of the room..
To optimize the functioning of the conditioner adjust the temperature ( 1 ),
the speed ( 2 ) and the direction of the air flow ( 3 ) by pressing the keys
indicated
▲ ▼
The appliance is fitted with a Hot Start function, which delays
appliance to startup in a few seconds to ensure an immediate
output of hot air.
In HEATING operation, the appliance can automatically activate a
defrost cycle, which is essential to free the condenser from an
excessive deposit of frost .This procedure usually lasts for 2-10
minutes during defrosting,fans stop operation. After defrosting ,it
returns to HEATING mode automatically.
1
2
3
FEEL mode indicator 10 MIDDLE FAN SPEED indicator
COOLING indicator 11 HIGH FAN SPEED indicator
DEHUMIDIFYING indicator 12 SLEEP indicator
AUTO FAN indicator 17 BATTERY indicator
LOW FAN SPEED indicator 18 CLOCK indicator
FAN ONLY OPERATION indicator 13 SUPER indicator
HEATING indicator 14 HEALTHY indicator
TIMER OFF indicator 15 ECO indicator
ECO
TIMER ON indicator
16
BATTERY indicator
Meaning
1
2
3
8
9
4
5
6
7
No. Symbols
Meaning
No.
Symbols
Remote control DISPLAY
Meaning of symbols on the liquid crystal display
5